Loading...
Sugarcane Plantation
The ring pit method of sugarcane planting increases yields by 30-40% compared to traditional furrow planting. MMS Ring Pit Machines make this advanced technique accessible to every farmer.
Agriculture
The Challenge
Traditional furrow planting of sugarcane leads to water wastage, poor ratoon management, and lower yields. Manual ring pit digging is extremely labor-intensive, requiring 50-60 man-days per hectare, making adoption impractical for most farmers.
The Solution
MMS Ring Pit Machines create perfect circular pits in seconds. One machine can prepare 1 hectare in just 8-10 hours, replacing the work of 50+ laborers. The consistent pit dimensions ensure uniform crop growth and excellent ratoon performance.
Key Benefits
30-40% Higher Yield
Ring pit method consistently produces higher yields than traditional furrow planting.
40% Water Savings
Circular pits retain water better, reducing irrigation requirements significantly.
Better Ratoon Crop
Strong root development leads to excellent ratoon performance for 3-4 cycles.
90% Labor Reduction
One machine replaces 50+ laborers for pit digging work.
Step-by-Step Process
Work easily with our equipment
1
Field Preparation
Plow and level the field. Mark pit positions in a grid pattern (2m x 2m spacing recommended).
2
Machine Setup
Attach the ring pit machine to your tractor (35-45 HP). Adjust depth settings based on soil type.
3
Pit Digging
Position over marked spots and operate the machine to dig circular pits (75cm diameter, 30-45cm depth). Each pit takes 15-20 seconds.
4
Fertilizer Application
Add FYM, compost, and basal fertilizer dose to pits. Mix with soil before planting.
5
Planting
Place 3-4 setts in each pit in circular arrangement. Cover with 5-7cm soil. Water immediately.
6
Maintenance
Earthing up after 60 and 90 days. Proper irrigation in pit basins for water efficiency.
ROI Analysis
Savings with MMS equipment compared to manual methods
| Factor | With MMS Equipment | Manual Method |
|---|---|---|
| Pits per day | 2000-2500 | 100-150 |
| Labor for 1 hectare | 1 operator, 1 day | 50-60 man-days |
| Yield increase | +30-40% | Baseline (furrow) |
| Water savings | 40% less irrigation | Baseline |
Payback Period: 1-2 seasons
Recommended Products
Best equipment for this application
Frequently Asked Questions
What is the ideal pit size for sugarcane?
For sugarcane, 75cm (30") diameter pits with 30-45cm depth work best. Our ring pit machine is specifically designed to create these optimal dimensions.
How many pits per hectare are needed?
Typically 2,000-2,500 pits per hectare with 2m x 2m spacing provides optimal results. This can be completed in one day with our ring pit machine.
Is ring pit method suitable for all soil types?
Yes, ring pit method works well in most soil types. It is especially beneficial in heavy clay soils and areas with water scarcity as it improves water retention.
What tractor HP is needed for the ring pit machine?
Our ring pit machine works efficiently with 35-45 HP tractors, making it accessible to most farmers. Higher HP tractors can work faster in hard soil conditions.
Can ring pit method be used for ratoon crop?
Yes, one of the biggest advantages of ring pit method is excellent ratoon performance. The strong root system developed in pits supports 3-4 ratoon cycles with good yields.
Ready for Sugarcane Plantation?
Contact our team and learn how our equipment can help you.